MORLEY ZX1Se User Manual download pdf (Page 5)

Electrical ZX1Se ZX2Se ZX5Se

Operating Voltage 230V AC 50Hz (+10%,-15%) 230V AC 50Hz (+10%,-15%) 230V AC 50Hz (+10%,-15%)

Maximum PSU Rating 4.2A total, comprised of 2.5A min @ 25V 8.6A total, comprised of

(panel and loop supply) 1.75A min charger current 2.25A min @ 25V (panel

supply) 2.5A min @

35V (loop supply) 1.66A

min @ 12V (printer supply)

2.2A min charger current

Loop Load 460mA maximum 460mA per loop maximum 460mA per loop maximum

Stand-by Batteries:

Minimum Capacity 2 x 12V 7Ah 2 x 12V 7Ah 2 x 12V 12Ah

Maximum Capacity 2 x 12V 12Ah 2 x 12V 12Ah 2 x 12V 24Ah

Panel Designed to Meet up to max 38Ah

up to max 38Ah

2&3

EN54-4 Charging

Requirements For Larger

Batteries if Required

Mechanical ZX1Se ZX2Se ZX5Se

Dimensions (mm) 400 x 400 x 135 (H x W x D) 400 x 400 x 135 (H x W x D) 500 x 500 x 195 (H x W x D)

Weight (without batteries) 10 kg 10 kg 20 kg

Colour RAL 9002 - Grey White RAL 9002 - Grey White RAL 9002 - Grey White

Environmental Operating Limits:

Temperature 0ºC to + 40ºC 0ºC to + 40ºC 0ºC to + 40ºC

Humidity 85% non-condensing (max) 85% non-condensing (max) 85% non-condensing (max)

Construction Sheet steel painted, Sheet steel painted, Sheet steel painted,

sealed to IP30 sealed to IP30 sealed to IP30

Cable Entry 14 x 20mm knock-outs in top of cabinet 24 x 20mm knock-outs top

2 x 20mm knock-outs in bottom of cabinet 24 x 20mm knock-outs bottom

400 mm

135 mm

400 mm

135 mm

400 mm

500 mm

195 mm

500 mm

Notes

Multiple sensor protocols cannot be used in the panel simultaneously. However, different panels on the same network can support different protocols

Separate battery box required

Please contact your local business manager if there is a requirement to charge batteries >38Ah

* not drawn to scale

1 2 3 4 5 6

No comments

MORLEY ZX1Se User Manual Page 5