Morley BASS WAH (PBA) User Manual download pdf

THANK YOU!

For purchasing a Morley® pedal. You now

own the best Bass Wah pedal made!

Please take a few minutes to familiarize

yourself with the features of your new

pedal. With common sense handling, it

should last for years. We know you will

appreciate the rugged construction of your

Morley®. Most of all, we hope you enjoy

using it as much as we enjoyed building it.

AC ADAPTER

Use only Morley’s 9-volt 300 milliamp

regulated adapters. Using a non-regulated

adapter could cause a low frequency hum

in your amplifier and may damage the

pedal.

BATTERY

The Bass Wah is designed to use one 9 volt

battery when not using an adapter. We

suggest you use a good quality alkaline

battery.

To prolong battery life, unplug your cord

completely from the input jack when not

using the pedal. When the pedal is not used

for extended periods, we recommend you

remove the battery from the pedal or

replace it every six month to prevent

leakage problems.

CONNECTIONS

9V: Connect Morley’s 9 volt 300 milliamp

regulated AC adapter to this jack.

IN: Input jack. Plug instrument into this

jack using 1/4” guitar cable.

OUT: Connect amplifier to this jack using a

1/4” guitar cable.

NOTE: You’ll find cords fit very tightly

into our input and output jacks. The tight fit

helps prevent the cord from becoming

accidentally unplugged from the pedal.

Make sure the cords are completely

plugged in for best results.

CONTROLS

WAH LEVEL CONTROL: Dial in exactly

the amount of WAH you need. Setting this

control at 10 o’clock position is great for

subtle wah changes and enhancements to

your tone. Set the control at the 12 o’clock

(mid) position for standard wah tones. For

full on WAH funk fest, turn the level

control full up.

BATTERY REPLACEMENT

When the battery becomes weak, the

overall wah will become weak and your

signal may become slightly distorted.

Remove the battery door located on the

bottom of the pedal (a short cord is

attached to the door to help prevent loss)

Once the door is off, the old battery can be

removed from the battery snap and a new

battery plugged in. Make sure the polarity

(+/-) is correct before inserting the new

battery.

When you replace the battery door , you

will notice it fits very tightly against the

battery. This prevents the battery from

rattling inside the pedal.

WARRANTY

All Morley® pedals are warranted for two

years from date of purchase. To obtain

warranty service contact the store where

purchased, or call 1-800-284-5172.

SPECIFICATIONS

POWER: 9 Volt Battery

CURRENT DRAW: 12 mA @ 9 VDC

WEIGHT: 3.2 lb./ 1.46 kg

INDICATOR: Wah mode LED on

Bypass mode LED off

1 2

THANK YOU! 1
Bass WAH 2

Summary of Contents

Page 1 - THANK YOU!

THANK YOU! For purchasing a Morley® pedal. You now own the best Bass Wah pedal made! Please take a few minutes to familiarize yourself with the featu

Page 2 - Bass WAH

Here is a general recommendation for hooking up a WAH with other effects: NOTE: This pedal is not intended for use through an effects loop (send an

Comments to this Manuals

No comments

Morley BASS WAH (PBA) User Manual

Browse online or download User Manual for Musical Instruments Morley BASS WAH (PBA). Morley BASS WAH (PBA) User Manual [en] [fr] [de]

Summary of Contents

Comments to this Manuals

Related products and manuals for Musical Instruments Morley BASS WAH (PBA)