MORLEY-IAS ZX Fire Alarm Control Panel
Page 4 Document No.996-182-000-1, Revision: 01 User Manual
Key Legend Symbol Function
0 to 9 Press to enter numbers 0-9 or letters A-J (N-W with Shift)
> Press to scroll through fire alarms or faults manually on the display or
letter K (X with Shift)
< Press to scroll back through fire alarms or faults manually on the
display or letter L (Y with Shift)
Change
ZM
Press to change a display option (where allowed)
or letter M (Z with Shift)
Enter
Press to confirm entry of a multiple digit number
No
Press to answer No, or terminate a display option
Yes
Press to answer Yes, or step through a display option
Shift
Press to show user options on the display
Press, during programming, to allow entry of Letters N-Z
Table 2 - Alphanumeric and Interactive Control Keys
• The control keys are disabled at USER LEVEL 1. Pressing the SHIFT key will cause the display to prompt
for entry of the Level 2 password. The password must be entered to re-enable the control keys at Level 2.
3.2 Front Panel LED Indications
• The Level 1 LED Indicators are divided into two
sections.
• The upper array of LED Indicators shows the
operational conditional of the panel and the
installation.
• The lower array of Zone LED indicators shows
the location of a fire alarm or fault.
• The standard Zone LED Indicators provide
identification for up to 20 zones. On the ZX5Se
and ZX10Se panels, this can be extended by
adding either a further 20 zones (to give a total of
40 zones) or a further 60 zones (to give a total of
80 zones).
• The LED Indicators illuminate as red, yellow or
green to give a clear indication of the panel
status as follows:
FIR
FAUL
System / CPU Faul
cknowledge
Earth Faul
Disablemen
Tes
Sounder Faul
Delayed Mode
Relays Disable
Powe
Supply Faul
larms Silence
Sounders Disable
Figure 3 - System Control LED Display
Comments to this Manuals